Comments on: Grab your DVD now!

By: Interior House Painting, Painting Trim and Woodwork « Sacramento House Painting

Mon, 12 Jul 2010 03:47:33 +0000

[...] and I’m sure you’ll make the right one. So stick around and I’ll teach you what interior house paint to apply for your kitchen and wet areas in your [...]

By: Interior House Paint – home painting your kitchen and bathroom « Sacramento House Painting

Sun, 11 Jul 2010 12:14:17 +0000

[...] I hope I’ve helped you out with more good information on what interior house paint to use for your kitchens and wet areas. Don’t forget if you’ve got a question you need [...]

By: Interior Wall Painting, Interior House Paint for Painting Plaster Walls « Sacramento House Painting

Wed, 07 Jul 2010 17:42:48 +0000

[...] in my next post of home painting. Read all about the second type of painting walls in “What interior house paint goes where and [...]

By: HOME INTERIOR DECORATION, UNDERCOATING SURFACES WHEN PAINTING YOUR HOUSE %CLIP% %KEYWORDS% %CLIP% %BLOG%

Tue, 06 Jul 2010 17:17:06 +0000

[...] powdery finish as well as have been not cosmetic looking. So recollect this when starting your home interior decoration pursuit a undercoat is a many critical cloak of paint which will establish a result of your [...]

By: Interior Wall Painting, Interior House Paint for Painting Plasterboard | greenecofriendlyIdeas.com

Wed, 09 Jun 2010 16:47:47 +0000

[...] want when painting walls. Splash some paint around and colour your world he he! That is it for what interior house paint goes where and why when painting walls of the second [...]

By: Wall Painting ? DIY Interior Wall Painting Tips | Clarksville Painter

Wall Painting ? DIY Interior Wall Painting Tips | Clarksville Painter — Tue, 08 Jun 2010 04:05:53 +0000

[...] Lack or too little preparation. What I refer to is filling cracks and holes prior to painting. Your prep work is vital in determining the outcome and finished product of any job your doing. When it comes to painting, remember 95% is prep and 5% is finish work. You stick to that rule and you can’t possibly go wrong. OK! Putting too much filler or Spackle on the walls. I’ve seen some people and been to rescue missions where people have got this wrong and it looks like either a couple of things have happened, firstly it has looked like they stood back and threw it at the walls from a distance or their two year old child got into the room while they were getting coffee and had a plaster party. In which case I’ve spent hours sanding and getting the walls back to a decent surface to work with. There really is no need to over fill your walls, take your time relax have some fun throw some filler or Spackle at someone enjoy the process of preparing your walls and you say “yeah right whatever”. But seriously now just a couple of light skims if you don’t get it the first time do a second skim it will save hours of backbreaking work trust me. Failure to stir your paint and strain it through a stocking to remove bits of foreign junk and stuff. Just because it’s a new tin of paint and they’ve shook it up in the shop doesn’t mean it’s clean and doesn’t mean it’s stirred well. Make it a practice every time you open a tin of paint new or old to do these two important things and your walls won’t look like the surface of the moon and have bits of alien material on them. Painting walls with the wrong technique. When applying paint to walls GET A ROLLER OR EXTENSION POLE. Don’t roll it by hand, you need nice long strokes from the ceiling to the floor and you won’t need to work from a stepladder everything can be reached from standing. You need to put plenty on and lay it back off into the wet edge. This method allows you to keep flowing and moving without a break in your coat, allowing for a nice even consistent coat of paint…… oh and don’t forget to second coat. A nice build on the wall makes for better cleaning and if you had to fill your walls prior to first coat it stops bad flashing or patchiness in the final product. Tool mistake, a cheap and nasty roller sleeve. Try not to go for synthetic or sponge sleeves, although the synthetic sleeve can be used if you have no other option. The problem with these sleeves is they just can’t get enough paint on and when you’re talking walls you need good flow and plenty sliding on. What you need is! and I swear by them, they are the only ones I use and have done for years THE SHEEP SKIN OR LAMBS WOOL ROLLER COVER. I personally prefer the later one myself lambskin or lambswool. It leaves me with a nice smooth finish even if I really lay the coat on heavy. Sheepskin sleeves are a bit coarser which probably makes them better for things like brickwork or rough surfaces. I use them mainly for rendered brickwork where I can put plenty on. They take a bit to load up at first but once loaded they’re smooth and easy to use. Try both synthetic and lambswool, I guarantee you’ll go to the lambswool cover, they wash out a whole tonne easier and once cleaned out properly will last you years and years. You can’t beat natural fibre products when it comes to painting walls [...]

By: Home Interior Decoration, undercoating surfaces when painting your house | OatBlog.com

Mon, 07 Jun 2010 17:57:18 +0000

[...] sand to a nice powdery finish and are not plastic looking. So remember this when starting your home interior decoration job the undercoat is the most important coat of paint that will determine the outcome of your [...]

By: blueampu.net » Interior House Painting, Painting Rooms

blueampu.net » Interior House Painting, Painting Rooms — Thu, 03 Jun 2010 08:51:27 +0000

[...] and have it done in no time, saving you money and your precious time. So that’s it for how to paint a room in particular in what order to paint things. Catch ya round like a roller pole. Happy [...]

By: Wall Painting – DIY Interior Wall Painting Tips « Home Improvement Tips

Wall Painting – DIY Interior Wall Painting Tips « Home Improvement Tips — Mon, 31 May 2010 02:39:04 +0000

[...] Tool mistake, a cheap and nasty roller sleeve. Try not to go for synthetic or sponge sleeves, although the synthetic sleeve can be used if you have no other option. The problem with these sleeves is they just can’t get enough paint on and when you’re talking walls you need good flow and plenty sliding on. What you need is! and I swear by them, they are the only ones I use and have done for years THE SHEEP SKIN OR LAMBS WOOL ROLLER COVER. I personally prefer the later one myself lambskin or lambswool. It leaves me with a nice smooth finish even if I really lay the coat on heavy. Sheepskin sleeves are a bit coarser which probably makes them better for things like brickwork or rough surfaces. I use them mainly for rendered brickwork where I can put plenty on. They take a bit to load up at first but once loaded they’re smooth and easy to use. Try both synthetic and lambswool, I guarantee you’ll go to the lambswool cover, they wash out a whole tonne easier and once cleaned out properly will last you years and years. You can’t beat natural fibre products when it comes to painting walls [...]

By: Interior House Painting, Painting Ceilings

Interior House Painting, Painting Ceilings — Sat, 22 May 2010 14:40:13 +0000

[...] flat is your product. Watch this spot while I pluck my way through this subject on “WHAT INTERIOR HOUSE PAINT GOES WHERE AND WHY” and you will be able to read about walls and what we do to [...]